Scyon™ Stria™ Vertical Flashing Stop

For use with Scyon™ Stria™ cladding behind boards at vertical joints.

Length: 3,000mm  SAP: 305547  5 per pack or 1 each

HardieBlade™ Saw Blade

A poly-diamond blade for fast and clean cutting of James Hardie fibre cement

Length: 185mm  SAP: 300660  Selling Unit: 1 each
Length: 254mm  SAP: 303375  Selling Unit: 1 each

James Hardie® joint sealant

Paintable polyurethane sealant.

Required accessory supplied by James Hardie
 

Scyon™ Stria™ Aluminium External Box Corner. 3,000mm long.

A ready to paint aluminium extrusion to be used with Scyon™ Stria™ cladding to create external boxed corners.

SAP: 305519
5 per pack

Required accessory supplied by James Hardie

Scyon™ Stria™ Aluminium Internal Corner. 3,000mm long.

A ready to paint aluminium extrusion to be used with Scyon™ Stria™ cladding to create internal corners.

SAP: 305518
5 per pack

Required accessory supplied by James Hardie

James Hardie™ 75x75mm Colorbond® Corner Flashing

A Colorbond® corner flashing for use behind cladding at internal and external corners.

Length: 3,000mm  SAP: 305564  Selling Unit: 5 per pack

Vapour permeable membrane

Must have the following properties in accordance with AS/NZS 4200.1:
Vapour barrier - low or medium
Water barrier – high
 

Bostik Seal ‘N’ Flex 1

A suitable replacement for where James Hardie joint sealant is specified (supplied in sausage form)

Required accessory NOT supplied by James Hardie

40 and 50 x 2.8mm fibre cement nails

Minimum Class 3
(see fastener durability section)
40mm for concealed fixing.
50mm for face fixing.

Required accessory NOT supplied by James Hardie

Compound mitre saw

Dust reducing compound mitre saw used with HardieBlade™ saw blade.

Makita: LS0714 / LS1013 / LS1212
Hitachi: C10FSB / C10FSM

Required accessory NOT supplied by James Hardie.

30mm Buildex FibreTeks®

Galvanised screw for concealed fixing to 0.55 – 0.75mm BMT steel framing.

Required accessory NOT supplied by James Hardie

Quikdrive Collated Screw -CBSDG114-SA

32mm long Class 3 galvanised screw for fixing to 0.8-1.6mm BMT steel framing.

Required accessory NOT supplied by James Hardie

Gun nails and nailer

Suitable gun nails and nailers for concealed fixing to timber framing. Minimum nail length of 40mm is required.

Required accessory NOT supplied by James Hardie

Bond Breaking Tape

Used behind sealant at joints, refer to the installation manual for more information.

Required accessory NOT supplied by James Hardie

Vacuum extraction with HEPA filter

Used with HEPA filter and paper bag for reduced dust exposure.

Required accessory NOT supplied by James Hardie
 

HardieDrive™ Screw 32mm

A class 3 self-tapping wing-tipped screw for fastening to 0.8mm to 1.6mm BMT lightgauge steel frames.

Length: 32mm  SAP: 305532  Selling Unit: 500 per box