James Hardie® joint sealant

Paintable polyurethane sealant.

Required accessory supplied by James Hardie
 

HardieBlade™ Saw Blade

HardieDrive™ Screw 32mm long.

A class 3 finish self-tapping wing-tipped screw for fastening to 0.8mm to 1.6mm BTM steel frames.

SAP: 305532
500 per box

Required accessory supplied by James Hardie.

ND 50mm stainless steel brad nails

14 gauge x 50 mm brad 304 stainless steel nail for fixing Scyon™ Axon sheets to timber frames.

Required accessory supplied by James Hardie
 

James Hardie™ Aluminium Snap On Corner. 3,000mm long (2 pieces per set).

A ready to paint aluminium extrusion set, to be used with Scyon™ Axon™ cladding,  HardiePlank™ weatherboard and PrimeLine® weatherboard, at internal and external corner junctions to conceal the board edge.

SAP: 305513
5 sets per pack

Required accessory supplied by James Hardie

James Hardie™ 50mm wide Foam Back Sealing Tape. 25mtr long roll.

A self-adhesive foam tape to help improve water tightness with EasyLap™ panel and Scyon™ Axon™ cladding. It is applied under sheet joins to the vapour permeable membrane along the stud face.

SAP: 304560
1 each

Required accessory supplied by James Hardie
 

Buildex fibreTeks®

30mm long for 0.55 to 0.75mm base metal thickness (BMT) steel frames.

Required accessory NOT supplied by James Hardie

Fibre cement nail

40 x 2.8mm galvanised fibre cement nail.

Required accessory NOT supplied by James Hardie

Vapour permeable membrane

Must have the following properties in accordance with AS/NZS 4200.1:
Vapour barrier - low or medium
Water barrier – high
 

Vacuum extraction with HEPA filter

Used with HEPA filter and paper bag for reduced dust exposure.

Required accessory NOT supplied by James Hardie
 

Circular Saw

Dust reducing circular saw used with HardieBlade™ saw blade.

Makita: 5057KB
Hitachi: C7YA
 

James Hardie™ 9mm Aluminium External Corner. 3,000mm long.

James Hardie™ 9mm Aluminium Internal Corner. 3,000mm long.